Thursday 16 May 2013

Photo Taking Tips For Your MISI Shop



Great photography is a necessity when you have a handmade jewellery website. Unfortunately, handcrafted jewelry is very difficult to photograph. Many jewelry artisans cannot afford to go to a professional and so they want to do it themselves. There are some simple techniques that even amateur photographers can use to obtain better results with minimal effort. The following suggestions should allow anyone to achieve results they can be proud of.

1. Improve Sharpness

The macro lens is a big help for the sharpness factor. Another key to a sharp image is a tripod. It is absolutely essential to use a tripod or similar camera support when taking pictures of handcrafted jewelry. A sturdy tripod is better than a flimsy one, but any tripod is many times better than no tripod. Always use a tripod and your photos will be sharp.


2. Get Lighting Right

Normally diffuse lighting works best for jewelry so that there is no glare. We cannot sit around waiting for the perfect slightly cloudy day to take pictures of new handcrafted jewelry designs. You have probably already discovered that an on-camera flash does not lead to good photos. Not only is the flash too bright at such a close distance, it will also create bright spots and distracting shadows. Rather than flash it is better to use continuous lighting for photographing handmade earrings and handmade bracelets. Using daylight balanced bulbs for lighting provide natural-colored light. You can purchase these from photography suppliers. We use 5200 K bulbs which resembles daylight most closely. Even these lights will need to be diffused and for that use a light tent as the diffuser.


A small light tent makes it easy to reduce glare and control shadows for handcrafted jewelry photography. These are commercially available in a wide range of sizes and shapes, but are generally quite expensive. It is not difficult to make your own lighting tent from white rip-stop nylon material, a couple of metal coat hangers and double-sided tape. The light tent tends to soften the shadows and eliminate glare, while providing a clean and clutter free background. We place the tent on a glass table and have a light under the table to reduce shadows.

3. Find the Perfect Exposure

Proper exposure is the last key to good handmade jewelry photography. If your background is actually white but appears gray in your image then the image has been underexposed. This means you need to let more light get to your camera’s image sensor. Adjust your camera exposure compensation setting to slightly overexpose the image. Nearly every digital camera has an exposure compensation setting, but you may need to read your camera user manual to find how to adjust yours. Once you locate the controls for exposure compensation simply increase the exposure until the image looks correct. We adjust the white balance so that the background shows white and this dramatically affects the crispness of the colors.




0 comments:

Post a Comment